Tug Burnett – Truckable Tug
Tug Burnett
Length: 25′ ft, Width: 14′ ft, Depth: 5′ ft
Used for marine construction, tug boat, push boat, work boat, shuttle/material ferry, and crew boat.
- 420 hp
- Flanking Rudders
- Truckable Tug
Specifications
| Length | 25 ft |
| Width | 14 ft |
| Depth | 5 ft |
| Engine | Twin Cummins DR6746RX 6BT new factory remanufactured 210 HP each |
| HP | 420 |
Additional Details
- Length: 25 ft. 11 inches
- Beam: 14 ft. 0 inches
- Draft: Approx. 4 ft. 6 inch
- Eye level off waterline: Approx. 14 ft. 9 inch.
- Approximate dry weight: 38,000 lbs.
- Approximate weight w/ fuel: 46,000 lbs.
- Fuel Capacity: 1,000 gallons total, each motor has a 250 gallon tank with center 500 gallon transfer tank for storage or to power both motors
- Engines: Twin Cummins DR6746RX 6BT new factory remanufactured 210 HP each
- Cooling system: Keel cooled through 8” channels each motor separate system
- Transmissions: Twin Disc MG-5075-SC 2.88:1 Ratio
- Steering- non follow up Hydraulic
- Tool storage room under pilot house
- Steering: electric over hydraulic
- Prop Shafts: 2.75” diameter with PYI Inc. PSS shaft seals
- Propellers: 32” x 17 four blade Power Tow style bronze
- Push knees: 10” wide x 5’ 8” tall with rubber bumpers
- Winches- 2 qty. 5 ton deck mounted
- Electronics: Furuno
- Flanking rudders
Cummins Marine:
Propulsion diesel engine 6BT 210HP @ 2600RPM Tier I Emission