Tug Rustler – Truckable Tug

Tug Rustler

Length: 25′ ft, Width: 14′ ft, Depth: 5′ ft

Used for marine construction, tug boat, push boat, work boat, shuttle/material ferry, and crew boat.  

• 600hp
• Flanking Rudders
• Truckable Tug

Specifications

Additional Details

• Draft: Approx. 4 ft. 6 inch
• Eye level off waterline: Approx. 14 ft. 9 inch.
• Approximate dry weight: 34,000 lbs.
• Approximate weight w/ fuel & fluids: 40,000 lbs.
• Fuel Capacity: 700 gallons total, each motor has its own 350 gallon tank
• Cooling system: Keel cooled, each motor cooled by a separate system.
• Transmissions: Twin Disk MG-5075SC Marine Transmission
• Steering: non follow up Hydraulic
• Rudders: 5/8″ thick steel plate w/ welded fencing and 1.75″ shafts.
• Prop Shafts: 2.5″ diameter stainless steel with PSS shaft seals
• Push knees: height above deck 4 ft. 2″ Rubber weld on bumpers on faces of push
  knees.
• 4 qty. lifting lugs incorporated at 4 corners so the boat can be lifted with a crane.
• Pilot house on the tool room (Texas Deck) style
• Pilot house Cab: Approx. 5’W X 7′ TX 5′ 10″ L two-man cab, with 2 sliding side
  windows, rear access door, and top hinge, partial swing-out middle front window.
• 2 qty. 24v fans for engine room vents
• Flanking Rudders:
  • 40-Degree pivot angle
  • Flanking Shafts 2.5″ 1045 carbon steel
  • Flanking rudder stock 1/2″ A36 plate
  • Tides Marine bearing & bushings